Warehouse Fire — No Fire Detection or Protection
Third Coast Industries Petroleum Products Facility Fire
Third Coast Industries
📍 Brazoria County, TX
Incident: May 1, 2002 • CSB Report: March 6, 2003
0
Fatalities
0
Injuries
Motor Oils and Flammable/Combustible Liquids (1.2 Million Gallons Consumed)
Chemical / Hazard
13
CSB Recommendations
📋 Incident Summary

On May 1, 2002, a fire erupted at Third Coast Industries in unincorporated Brazoria County, Texas. The facility blended and packaged motor oils and other automotive products and was not designed or equipped to prevent the spread of fire.

Despite firefighters' efforts, the fire consumed 1.2 million gallons of combustible and flammable liquids and destroyed the site. About one hundred nearby residents were evacuated, a local school was closed, and significant environmental cleanup was needed. No employees or firefighters were injured.

The CSB found that inadequate fire detection and protection systems led to the disaster. It approved its final report on March 6, 2003, with 13 recommendations.

🔎 Key Findings
Finding 01
Not Designed to Prevent Fire Spread
The facility lacked the design and equipment to keep a fire from spreading.
Finding 02
Inadequate Fire Detection
The CSB found inadequate fire detection and protection; it recommended codes specify automatic detection for facilities not staffed around the clock.
Finding 03
No Fire Code in Unincorporated Area
The CSB recommended Brazoria County adopt a fire code for unincorporated areas.
Finding 04
Class IIIB Exemptions
The CSB recommended narrowing fire code exemptions for high-flashpoint Class IIIB liquids.
Finding 05
Community Impact
About 100 residents were evacuated, a school closed, and runoff and fumes required cleanup.
🔍 Root Causes
1
Inadequate fire protection
No effective detection or suppression to control a fire early.
2
Code gaps
No local fire code applied, and national codes had broad exemptions.
3
Large combustible inventory
1.2 million gallons of liquids fueled the fire.
☑ CSB Recommendations
→ Third Coast Industries (1)
Audit the Third Coast Terminals facility in Pearland, Texas, to ensure fire suppression and control meet NFPA 30 and OSHA 1910.106. (Closed as unacceptable.)
→ NFPA (1) and International Code Council (1)
Revise NFPA 30 and the International Fire Code to require automatic fire detection where facilities are not staffed around the clock, narrow Class IIIB exemptions, and expand fire protection analysis to all areas with fire risk.
→ Brazoria County, Texas (1)
Adopt a fire code for unincorporated areas.
→ Trade, fire service, and insurance organizations (9)
API, ILMA, Petroleum Packaging Council, NACD, NACo, IAFF, National Volunteer Fire Council, National Association of State Fire Marshals, and RIMS: communicate the findings to members.

Full recommendation text and current status: CSB investigation page.

💡 Lessons Learned
High-flashpoint liquids still burn; large inventories need real fire protection.
Facilities not staffed around the clock need automatic detection.
Check which fire code applies to your site, especially in unincorporated areas.
Plan for runoff and community impacts from a large fire.
EAP: Emergency PlanningPHA: Process Hazard AnalysisMI: Mechanical IntegrityPSI: Process Safety Information
🔨 Safety Meeting Toolbox Talk
►Would we detect a fire at night if no one is on site?
►What fire code applies to our facility?
►Could a fire in one area spread to the whole site?
►Where would firewater runoff go?
Immediate Action Items
✓Review fire detection coverage for unstaffed periods.
✓Confirm the applicable fire code and assess compliance.
✓Evaluate fire separation between storage areas.
🔗 PSM Failures Behind This Incident

This incident involved breakdowns across 4 PSM-related areas (EAP · PHA · MI · PSI). Each represents a gap that process safety programs are designed to close.

Emergency Planning & Response
When process safety barriers fail, emergency response capability determines whether the outcome is controlled or catastrophic. Gaps in emergency preparedness amplified the consequences here.
Supporting documents in our library →
Process Hazard Analysis (PHA)
A structured PHA or HAZOP study exists to identify exactly these scenarios before they occur. When PHA is absent, superficial, or overdue for revalidation, hazards operate unseen until they kill someone.
Supporting documents in our library →
Mechanical Integrity (MI)
Equipment must be designed, inspected, and maintained to operate safely in its intended service. Mechanical integrity failures contributed to loss of containment here.
Supporting documents in our library →
Process Safety Information (PSI)
Accurate, complete Process Safety Information is the foundation every other PSM element depends on. When PSI is missing or wrong — chemistry data, equipment specs, P&IDs — the entire hazard analysis is built on a flawed base.
Supporting documents in our library →
Process Safety Management Consulting & Document Library
📂
PSM Document Library
72 ready-to-deploy PSM documents covering all 14 OSHA elements — procedures, checklists, and audit templates built for facilities operating under 29 CFR 1910.119.
Browse the Library →
📊
Free PSM Health Score
Find out where your PSM program stands across all 14 OSHA elements. Our free health score surfaces your biggest gaps in under 10 minutes — no account required.
Check Your Score →
📞
Consulting Services
PHA facilitation, PSM program builds, compliance audits, and OSHA inspection support. Scoped per project with a written proposal before work begins — no retainer required to get started.
View Pricing →
📋 Explore the full incident library: All 111 CSB Case Studies →