Nitrous Oxide Trailer Explosion
Airgas Nitrous Oxide Facility Fatal Explosion
Airgas, Inc. (an Air Liquide company)
📍 Cantonment, FL
Incident: August 28, 2016 • CSB Report: April 20, 2017
1
Fatalities
—
Injuries (not stated in CSB summary)
Nitrous Oxide
Chemical / Hazard
6
CSB Recommendations
📋 Incident Summary

On August 28, 2016, a nitrous oxide explosion at the Airgas facility in Cantonment, Florida, near Pensacola, killed one worker. Nitrous oxide can decompose violently.

The CSB noted that safety management system and regulatory deficiencies contributed to the incident. Its recommendations point to the issues: a nitrous oxide pump run-dry shutdown interlock that should be designed to the ISA-84 safety instrumented systems standard, strainers used as flame arrestors that needed testing under realistic conditions, the lack of a safety management system standard for nitrous oxide manufacturing, and pump literature that did not warn about decomposition hazards.

The CSB released its final report on April 20, 2017, with 6 recommendations. After the incident, Air Liquide began a comprehensive review of its nitrous oxide production facilities, trucking fleet, and cylinder filling.

🔎 Key Findings
Finding 01
Nitrous Oxide Decomposition
Nitrous oxide decomposition caused the explosion.
Finding 02
Pump Run-Dry Interlock
The CSB recommended applying ISA-84 to safety interlocks such as the nitrous oxide pump run-dry shutdown.
Finding 03
Flame Arrestor Not Proven
Strainers relied on to quench decomposition needed to be tested under simulated conditions of use.
Finding 04
No Industry Safety Management Standard
The CSB recommended a safety management system standard for nitrous oxide manufacturing.
Finding 05
Hazard Warnings Lacking
Pump manufacturers' literature did not warn about decomposition hazards.
🔍 Root Causes
1
Decomposition hazard not managed
Safeguards against nitrous oxide decomposition were not designed or verified to a recognized standard.
2
Safety management gaps
No process safety management system covered the known hazard.
3
Regulatory gaps
Nitrous oxide manufacturing was not covered by a process safety standard.
☑ CSB Recommendations
→ Airgas (1)
Complete the company's nitrous oxide process safety initiative across production, trucking, and cylinder filling.
→ Compressed Gas Association (3)
Develop a safety management system standard for nitrous oxide manufacturing, require testing of safety devices such as strainers used as flame arrestors, and require ISA-84 for safety interlocks like pump run-dry shutdowns.
→ ACD, LLC and Cryostar USA (2)
Add warnings about nitrous oxide decomposition hazards to pump product literature.

Full recommendation text and current status: CSB investigation page.

💡 Lessons Learned
Know your chemical's decomposition hazards, even when it is not on a regulated list.
Safety interlocks should be designed and maintained to ISA-84 / IEC 61511.
Test devices relied on as safeguards under realistic conditions.
Equipment suppliers' warnings matter; ask for them.
PHA: Process Hazard AnalysisMI: Mechanical IntegrityPSI: Process Safety InformationSOP: Operating Procedures
🔨 Safety Meeting Toolbox Talk
Topic: N2O and Oxidizer Decomposition Hazards & PSM Application
►Do any of our materials decompose energetically?
►Which of our interlocks are safety functions, and are they managed as such?
►Have we tested the devices we count on as flame arrestors?
►Do supplier manuals warn about our process hazards?
Immediate Action Items
✓Review decomposition hazards in PSI.
✓Classify safety interlocks and manage them under ISA-84.
✓Verify flame arrestor performance data.
🔗 PSM Failures Behind This Incident

This incident involved breakdowns across 4 PSM-related areas (PHA · MI · PSI · SOP). Each represents a gap that process safety programs are designed to close.

Process Hazard Analysis (PHA)
A structured PHA or HAZOP study exists to identify exactly these scenarios before they occur. When PHA is absent, superficial, or overdue for revalidation, hazards operate unseen until they kill someone.
Supporting documents in our library →
Mechanical Integrity (MI)
Equipment must be designed, inspected, and maintained to operate safely in its intended service. Mechanical integrity failures contributed to loss of containment here.
Supporting documents in our library →
Process Safety Information (PSI)
Accurate, complete Process Safety Information is the foundation every other PSM element depends on. When PSI is missing or wrong — chemistry data, equipment specs, P&IDs — the entire hazard analysis is built on a flawed base.
Supporting documents in our library →
Operating Procedures (SOPs)
Operators cannot reliably hold safe operating limits without clear, current, enforced procedures. Deviation from acceptable operating conditions is a direct consequence of SOP failure.
Supporting documents in our library →
Process Safety Management Consulting & Document Library
📂
PSM Document Library
72 ready-to-deploy PSM documents covering all 14 OSHA elements — procedures, checklists, and audit templates built for facilities operating under 29 CFR 1910.119.
Browse the Library →
📊
Free PSM Health Score
Find out where your PSM program stands across all 14 OSHA elements. Our free health score surfaces your biggest gaps in under 10 minutes — no account required.
Check Your Score →
📞
Consulting Services
PHA facilitation, PSM program builds, compliance audits, and OSHA inspection support. Scoped per project with a written proposal before work begins — no retainer required to get started.
View Pricing →
📋 Explore the full incident library: All 111 CSB Case Studies →